TREND雙金屬溫度計 BBQ thermometer

描述：德國WIKA公司是德國乃至世界上Z大的專業生產機械、電子壓力和溫度測試儀表及設備的廠家，總部位于德國法蘭克?？肆指ぃ且粋€擁有3000多名雇員的大型生產型企業，子公司遍布于美國、瑞士、加拿大、法國、英國、南非、巴西、中國、印度等七十多個國家

產品型號：
廠商性質：代理商
更新時間：2016-05-10
訪問量：3211

產品咨詢聯系我們

產品介紹/ PRODUCT PRESENTATION

電　　話：86 010 58461273
：
傳　　真：86 010 51413460
地　　址：北京北京市成壽寺路134號4號樓2209
郵　　編：100027
郵　　箱：controsys
公司主頁：http://www.controsys.cn

Basic Model: Measure the diameter of the Dial in inches, Also note if there is a screw or "bolt head" in the back. This determines if it can be adjusted or "resettable". Also note the mounting of the stem. the choices are: back, bottom and adjustable angle. You may also find some with left or right hand mounting, but these are less common. Select the Model from the following Table.
General Specifications

Model	Dial Size	Connection	Resettable
20	2"	Back	No
30	3"	Back	Yes
31	3"	Bottom	Yes
32	3"	Adjustable	Yes
33	3"	Back	No
34	3"	Bottom	No
50	5"	Back	Yes
51	5"	Bottom	Yes
52	5"	Adjustable	Yes
53	5"	Back	No
54	5"	Bottom	No

Stem Length: Measure the stem from the top of the threaded connection to the end of the stem. The standard lengths in inches are: 2.5, 4, 6, 9, 12, 18, 24, 30, 36, 42, 48, 54, 60, 66, 72. The length is specified as XXX; 2.5" = 025; 72" = 720

A - Trend
D - Wika

Dial Logo Use "A" for Trend and "D" for Wika

Scale: There are three types of scales for the dial: Dual Scale, Fahrenheit only and Celsius （Centigrade）. The Dual scale is most common but some consider it confusing and prefer the single scale. Use "0" for Dual, "1" for Celsius and "2" for Fahrenheit

Range: Select the two digit range code from the table on the right. Click on the table to see a larger version

A - Acrylic
L - Lexan ? （only on 2" & 3" dial）
S - Shatterproof Glass
G- Glass

Lens: Also know as the window or crystal. The standard is glass. Although tough it can break and leave fragments. Shatterproof glass may break but will not shatter into fragments. Acrylic and Lexan? are plastic lens and may replace the glass. Chemical fumes may fog the acrylic or Lexan?

0 - Plain
1 - 1/8" NPT
2 - 1/4" NPT
3 - 3/8" NPT
4 - 1/2" NPT
5 - G 1/2B
7 - Union Connection

Process Connection: By far the most common connection is 1/2" NPT. This connection has a diameter of approx 27/32 （0.840） inches. Other connections are: Plain （None）, 1/8" NPT, 1/4" NPT, 3/8" NPT, G 1/2 B or a Union connection.
Click here to see dimensions for pipes

Options:

SF - Silicon Fill

Silicon Fill is normally used where there is severe mechanical vibration. The silicon dampens and lubricates the internal mechanism, reducing oscillation and premature wear. Max Temp: 50/500 ?F. Only available on Models: 30, 31,32,50,51,52

ST: Sharp Tip

Sharp Tip: The tip of the stem is normally round to flat. The sharp tip makes it easier to pierce things

MM - Min/Max Pointer This is a manual indicator that is moved by the temperature indicator and shows the max. or min temperature reached. It is reset manually. Only available on Models 30 and 50

Connection Location. Bottom connected thermometers can be orders with the connection oriented to the left （LS）, right （RS） or the top （TS）

Heavy Duty If the thermometer is going to be inserted into compost, meat, etc. then a heavy duty stem is recommended. Option HD provides a 3/8" heavy duty stem with 2-1/2" x 1/4" OD sensitive tip, the HA option provide for a 3/8" heavy duty stem for the entire length and the HS option provides a 3/8" stem, reduced tip with a sharp point. The thermometer on the left is shown with the optional EZ-Insertion Handle.

EZ-Insertion Handle. This is recommended where the thermometer is inserted compost, meat etc. It saves using the dial as the handle P/N TA600-0163

316 Stainless Steel The case and stem is made of 304 SS. In some cases where a thermowell is not used, 316 SS is available for the wetted parts. Option code SS